Marshall Netzwerkswitch VS-SW-100

VS-SW-100

24 port 10/100/1000Mbps PSE with 2 port Gigabit SFP Switch for IP Cameras, Encoders and Decoders

24-port-PSE-SFP-Switch-VS-SW-100

Specifications:

Rackmount Ears Included

VS-SW-100 is 26-port 10/100/1000Mbps Power over Ethernet switch, which consists of 24 PSE/PoE, ports with an additional 2 SFP uplink port. The VS-SW-100 has been designed specifically for use with IP Cameras, Encoders and Decoders. It is compliant with PoE IEEE 802.3af/802.3at. Each of the 24 PSE/PoE Ports can concurrently supply up to 30 Watts of Power per Port (PoE+). This avoids the use of Multiple Power Supplies and makes System Installation a snap. Supporting 24 PTZ IP Cameras from One Power Outlet makes this an Efficient and Environmentally Friendly Solution.

    • Complying with IEEE 802.3 10Base-T / IEEE 802.3u 100Base-TX / IEEE 802.3ab 1000Base-T
    • Complying with IEEE 802.3x Flow control
    • Complying with IEEE-802.3af/at
    • Supporting the power up 30Watt for each PSE/PoE
    • Providing 24 10/100/1000Mbps switching ports and 2* Gigabit SFP ports
    • All ports support Auto-MDIX function
    • Being dedicated 2000Mbps Full-duplex bandwidth to the each port
    • Broadcast storm control and supporting store & forward operation
    • Non-blocking & Non-head-of-line blocking full-wire speed forwarding
    • Auto-learning networking configurations
    • Built-in 8K MAC learning table, 1.25M bits buffer memory
    • Support packet length up to 1536Bytes
    • Filtering/Forwarding Rate: 1000Mbps/1,488,000pps; 100Mbps/148,800pps; 10Mbps/14,880pps
    • Status LEDs: System Power, Link/Activity, and PoE/PSE on line
    • Transmission Media: 10Base-T Cat.3, 4, 5 UTP/STP; 100Base-TX Cat.5, 5e UTP/STP; 1000BASE-T Cat.5e, 6 UTP/STP
    • Internal Power supply: AC input (100-240V/AC, 50/60Hz) UL Safety
    • Switch Power Consumption: 20Watt (Less PoE)

 

 pdf_logo_klein  Owner´s Manual,

Untitled_1_1.jpg Download Pictures