Wimi5000

Zero ( < 20ms) latency of H.264 compression up to 1920x1080p60
WiMi5000 series provides wireless HDMI transmitter/receiver solution at the resolution of 1920x1080p60. Hardware-based H.264 compression engine is used for encoding full HD video signals. So, it can deliver full HD (1920 x 1080p60) video at 6 ~ 50 Mbit/s without any degradation of video quality. There is almost zero latency between transmitter (encoder) and receiver (decoder), approximately within 20 milliseconds. Super low latency is especially important for applications requiring real-time video transmission with the interaction. So, the WiMi5500 can be used for delay sensitive applications, such as Remote PC, IP KVM, PC2TV or gaming console with the HDTV.
 

 

Linear PCM and compressed audio, Dolby digital and DTS
The WiMi5000 series transmitter and receiver can transmit all audio formats, such as uncompressed audio with sampling rates of 44.1kHz, 48kHz, 96kHz and 192kHz(16-bits only) at 16-bits and 24-bits, and compressed audio, 7.1 channel Dolby Digital Plus and DTS-HD of 6Mbps.


Wireless: Maximum radio coverage of 150m (500 ft) at line of sight
The video and audio data from WiMi5000 series transmitter and receiver are transmitted and received through the standard IEEE 802.11n wireless LAN. Although the air condition is varying from time to time, it is enough to deliver audio/video data because WiMi5000 series requires typically 6~50 Mbit/s, which is tenth of wireless LAN bandwidth.

Wire-line: Ethernet/IP (WiMi5300T/R)
The WiMi5300 supports Ethernet wireline including public IP network at maximum 50~60 Mbps without any degradation of video quality. This will replace high cost optical transmitter used for full HD video transmission.

Provides one-to-many multicasting capability (option)
It supports one-to-many multicasting function. In Wi-Fi Mode, four receivers can display full HD video simultaneously.


Board solution without enclosure or cased WiMi5000 series solution provided

WiMi5000 series highlights

1080i60/1080p60 HD encode/decode with H.264 Baseline Profile Level 4.2

Supports both interlacing and progressive input streams


Very low latency, < 20 ms

Total latency of encode-decode in 1080p60 HD: < 20ms


Supports 3D video of HDMI v1.4a(WiMi5300/5500)

Up to 720p60 Frame Packing, 1080p24 Top & Bottom
1080p24 Frame Packing is converted to 1080p60 Top & Bottom


Supports SDI/HD-SDI/3G-SDI (WiMi5200 only)

Supports up to 4G-SDI (1080p60)
Supports embedded audio


Supports both TV & monitor standards

DTV: 1920x1080p24/50/60, 1920x1080i50/60, 1280x720p50/60, 720x576p50, 720x576i50, 720x480p60, 720x480i60
VESA: 1920x1080p60, 1600x1200p60, 1280x1024p60, 1280x960p60, 1280x768p60, 1024x768p60, 800x600p60, 640x480p60


Supports high quality audio, 16-bit 48kHz analog audio

Pass Through Uncompressed audio: 7.1 ch. 44.1kHz, 48kHz, 96kHz and 192kHz(16-bits only) at 16-bits and 24-bits
Pass Through Compressed audio: 7.1 ch. Dolby Digital Plus and DTS-HD of 6Mbps


Provides one-to-many multicasting capability (option)

Supports keyboard/mouse with USB back channel (WiMi5300T/WiMi5300R)

Small size of the Ethernet/wireless full HD

WiMi5300T/R enclosure (mm): 30 (H) x 145 (W) x 96 (D)
WiMi5300T/R board (mm): 20 (H) x 135 (W) x 91 (D)



Transmitter (WiMi5300T)

Video input
HDMI: up to 1080p60, HDMI v1.4a
Supports 720P60 Frame Packing 3D video
Supports 1080P24 Frame Packing with Top & Bottom

Digital audio input
HDMI : HDMI compatible audio
Pass Through Uncompressed 7.1 ch. with 24-bits, 96kHz sampling
Pass Through Compressed 7.1 ch. of Dolby Digital Plus/DTS-HD

Analog audio input/output
48kHz sampling frequency, 16-bit audio
Input/output jack: 3.5mm mini stereo audio jack

Ethernet output for audio/video/control
Best picture quality over local area network
Easiness of video networking including multicast
Video output
HDMI pass-through output: up to 1080p60, HDMI v1.4a

Encoding of moving pictures
H.264 (MPEG-4 Parts10: AVC)
Baseline Profile with Level 4.2 (1920 x 1080p60)

USB device port
USB back channel oprations
Firmware update

Wire-less output for audio/video
Supporting IEEE802.11n with internal antenna
MIMO interface
Up to 40m range through the wall (150m @ LOS)



Receiver (WiMi5300R)

Wire-less input for audio/video
Supporting IEEE802.11n with internal antenna
MIMO interface
Up to 40m range through the wall (150m @ LOS)

Decoding of moving pictures
H.264 (MPEG-4 Parts10:AVC)
Baseline Profile with Level 4.2 (1920 x 1080p60)

Analog audio input/output
48kHz sampling frequency, 16-bit audio
Input/output jack: 3.5mm mini stereo audio jack

Ethernet output for audio/video/control
Best picture quality over local area network
Easiness of video networking including multicast
Digital udio output
HDMI : HDMI compatible audio
Pass Through Uncompressed 7.1 ch. with 24-bits, 96kHz sampling
Pass Through Compressed 7.1 ch. of Dolby Digital Plus/DTS-HD

USB device port
USB back channel oprations
Firmware update

Video output
HDMI: up to 1080p60, HDMI v1.4a
Supports 720P60 Frame Packing 3D video
Supports 1080P24 Frame Packing with Top & Bottom

Downloads:

logo-pdf.png  Download Brochure

logo-pdf.png  Download Datasheet